2
3
4
1
5
Section 1
The Flashlight
5
1. Face Cap Assembly (lens and reflector)
The Face Cap Assembly is removable. The reflector
assembly is factory sealed and should not be removed from
face cap (Fig. 1). Lens: The polycarbonate lens on the Mag
Charger® LED Rechargeable Flashlight System is an
integral part of the optical system. Reflector: Scientifically-
designed metalized reflector.
2. Head The head is not removable; any attempt to do so
will only damage its function. Focusing Beam: Quick focusing
spot-to-flood beam. (Fig. 2) Operates with a simple quarter turn
of the flashlight head assembly.
3. Switch Sealed, flush-with-the-barrel electronic switch
provides access to five different functions – Full Power, Low
Power, Strobe (12x/sec), Eco, and Momentary On/Off.
4. Serial Number Permanently engraved serial number for
registration and identification. Please note your serial number for
future reference ____________________.
5. Durable Finish The barrel and head assembly are of Hard
Type III anodized aircraft aluminum inside and out. With minimum
care, your flashlight will help maintain its rich black appearance.
(Direct constant exposure to sunlight will fade any color.)
Fig. 2
Fig. 1
421_493_Rech_Man_LED_WHS_0320.qxp_Layout 1 4/5/21 9:35 AM Page 6
To Next Page
Loading...
