Points of Interest
34
Viewing a User-Created POI on the Map Screen
POIs that you have saved can be viewed on the
Map
screen to assist you in locating the POI.
1. Press MENU.
2. Use the Arrow joystick to highlight Pts of Interest.
3. Press ENTER.
4. Use the Arrow joystick up/down to highlight My Pts of Interest.
5. Use the Arrow joystick left/right to select Nearest or Alphabetical.
6. Press ENTER.
7. Use the Arrow joystick to highlight the POI to be viewed.
8. Press ENTER.
9. Use the Arrow joystick to highlight View on Map.
10. Press ENTER.
11. The
Map
screen will be displayed in the Cursor mode. The cursor will be directly
over the POI you have selected. You may use the Zoom buttons to change the scale
of the map displayed; and if your position icon is within range, it will be shown.
12. Press ESC to return to the list of POIs found in step 7.
Note: Remember that pressing the NAV button will return you to the last viewed
Map
screen. In step 12 if you are finished with the POIs in the POI database, you could
press NAV to close the POI database and return to the last viewed
Map
screen.
To Next Page
Loading...
