Calibrating The Power Meter
Charging
Peripheral Pairing and Functions
Zero offset calibration will calibrate the power meter to 0 power when at rest. When
calibrating, please turn the left crank in the vertical ground down state and use ANT+
Device or MACENE UTILITY for calibration.
Magene Power Meter wirelessly transmits ride information to a bike computer or receiver
that support ANT+ or Bluetooth.
Magene Power Meter logs the following information as you ride.
This product transmits the following information wirelessly to cycle computers or receiv-
ers that support ANT+ or Bluetooth LE connections.
Note:The 4,5,6 wireless receiver can only be used in part of the Apps of Magene.
If you are purchasing LITE version, 4 / 5 / 6 features need to be purchased through
Magene Utility.
When you find that the power meter is unable to search for a connection, the power meter
may have run out of power. Please charge it as soon as possible.
Power
Torque Effectiveness
Cadence
Pedal Balance
Remaining Battery
Pedal Smoothness
3
To Next Page
Loading...
Need help?
General