Why is my Magic Chef HMCF35W2 not working?
- DDebra WatsonAug 19, 2025
Your Magic Chef Freezer might not be working because it is not plugged in, or the circuit breaker has tripped, or a fuse has blown.

Why is my Magic Chef HMCF35W2 not working?
Your Magic Chef Freezer might not be working because it is not plugged in, or the circuit breaker has tripped, or a fuse has blown.
How to fix a Magic Chef Freezer that does not turn on?
If your Magic Chef Freezer isn't working, first, make sure it's properly plugged into the outlet. Also, check your circuit breaker or fuse box, as a tripped breaker or blown fuse could be the reason.
What to do if my Magic Chef HMCF35W2 Freezer is too warm?
If the temperature inside your Magic Chef Freezer is too warm, try these steps: * Turn the temperature control to a cooler setting, and then wait for several hours to allow the temperature to stabilize. * Avoid opening the door too often. Also, if you have recently stored a large quantity of warm or hot food, allow the freezer time to reach the selected temperature. If the freezer was recently disconnected, allow 4 hours for it to cool down completely. Check if the door is not closed completely and the door gasket doesn't seal properly.
What to do if the temperature inside my Magic Chef HMCF35W2 is too warm?
If the temperature inside your Magic Chef Freezer is too warm, try the following: * Turn the temperature control to a cooler setting and allow several hours for the temperature to stabilize. * Avoid keeping the door open too long or opening it too frequently. * If you have recently stored a large amount of warm or hot food, give the freezer time to reach the selected temperature. * If the freezer has recently been disconnected, allow 4 hours for it to cool down completely.
How to adjust the temperature if my Magic Chef Freezer is too cold?
To adjust the temperature if your Magic Chef Freezer is too cold, turn the control to a warmer setting and allow several hours for the temperature to stabilize.
Why does my Magic Chef HMCF35W2 compressor keep turning on and off?
If the compressor in your Magic Chef Freezer is turning on and off frequently, several factors could be the cause. These include a room temperature that is hotter than normal, adding a large amount of food to the freezer, opening the door too often, the door not being closed completely, an incorrect temperature control setting, a door gasket that doesn't seal properly, or the freezer not having enough clearance. If the freezer was recently disconnected, allow 4 hours for it to cool down completely.
How to adjust the temperature on a Magic Chef Freezer when it's too cold?
If the temperature inside your Magic Chef Freezer is too cold, it might be that the temperature control is set too low. Try turning the control to a warmer setting and allow several hours for the temperature to stabilize.
Why does the compressor in my Magic Chef Freezer turn on and off frequently?
The compressor in your Magic Chef Freezer might be turning on and off frequently due to: * The room temperature being hotter than normal. * Adding a large amount of food to the freezer. * Opening the door too often or not closing it completely. * Incorrect temperature control settings. * A door gasket that does not seal properly. * Insufficient clearances around the freezer. * The freezer having recently been disconnected; allow 4 hours to cool down completely.
Why does moisture form on the inside walls of my Magic Chef Freezer?
Moisture can form on the inside walls of your Magic Chef Freezer if the weather is hot and humid, which increases the internal rate of frost build-up. This is normal. It can also occur if the door is slightly open, kept open too long, or opened too frequently, or if the door is not sealed properly. Try to open the door less often.
Why does moisture form on the outside of my Magic Chef HMCF35W2?
Moisture may form on the outside of your Magic Chef Freezer if the door is slightly open, causing cold air from inside the freezer to meet warm moist air from outside.
| Brand | Magic Chef |
|---|---|
| Model | HMCF35W2 |
| Category | Freezer |
| Language | English |
Prepare the freezer by removing packing, checking parts, and allowing it to stand upright before connecting to power.
Proper placement on a strong floor, ensuring ventilation clearances, and avoiding heat sources or moisture.
Adjusting the temperature dial from 1 (warmest) to 7 (coldest) for optimal cooling and initial setup.
Procedures for defrosting when frost builds up, including draining, cleaning, and using caution with tools.
Instructions for cleaning the interior, exterior, and door gasket using mild detergent and baking soda solution.
Procedures for leaving the freezer for short or long periods, including cleaning and door position.
Steps to safely move the freezer, including removing food, securing items, and taping doors shut.
Advice on locating the freezer, cooling hot foods, proper wrapping, and reducing door openings for efficiency.