9
SETTING THE CLOCK
When the oven is first plugged in, the display will show “:0” and a tone will sound. If the AC power
ever goes off, the display show “ : 0” when the power comes back on.
CONTROLS
1. Touch the CLOCK pad.
This is a 12 hour clock system.
2. Touch the CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by
touching the TIME SET pads
in sequence.
4. Touch the CLOCK pad.
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Touch the CLOCK pad and re-enter the time.
The display stops blinking, and the colon starts
blinking. If you selected 12 hour clock system,
this digital clock allows you to set from 1:00 to
12:59. If you selected 24 hour clock system, this
digital clock allows you to set from 0:00 to 23:59.
NOTE : This oven has multiple clock systems.
If you want 12 hour clock system,
omit this step.
KITCHEN TIMER
This feature operates as a kitchen timer and can be used at stand-by mode when the oven is not in use.
1. Press and hold number 0 pad for
about 3 seconds.
2. Enter the time you want to count
down.
3. Press START pad to start.
When the time is up, the oven will beep.
" - - : - - " will appear in the display.
The display will show what you entered.
NOTE : The maximum time of kitchen timer
is 59 minutes 99 seconds. (59:99).
To Next Page
Loading...
