EN-11
MICROWAVE OVEN
CONTROL
10 power levels are available.
Level Power Display
10 100% PL10
9 90% PL9
8 80% PL8
7 70% PL7
6 60% PL6
5 50% PL5
4 40% PL4
3 30% PL3
2 20% PL2
1 10% PL1
1. Press " Clock " once, " 00:00 " will display.
2. Press the number keys and enter the current
time.
For example,time is 10:12 now, please press
"
1,0,1,2" in turn.
3. Press " Clock " to nish clock setting. ":" will
ash and the clock will be lighted.
4. If the numbers input are not within the range
of 1:00-- 12:59, the setting will be invalid until
valid numbers are input.
Notes:
1. In the process of clock setting, if " Clock "
is not be pressed or if there is no operation
within 5 minutes,the oven will go back to the
former setting automatically.
2. If the clock need to be reset, please repeat
step 1 to step 3.
2. Press the number keys and enter the timer
time.(the maximum value is 99:99).
3. Press " Start/Enter/Add 30 Sec. " to conrm
setting, time counts down.
Note: Any other program can't be set during
kitchen timer.
1. Press " Cook Time " once, the screen will
display "00:00".
2. Press number keys to input the cooking time;
the maximum value is 99:99.
3. Press " Power Level " once, the screen will
display "PL10". The default power is 100%
power. Now you can press number keys to
adjust the power level.
4. Press " Start/Enter/Add 30 Sec. " to start
cooking.
1. Press " Weight Defrost " once, the screen will
display "0.0".
2. Press number keys to input the weight to be
defrosted. Input the weight ranged between
0.3~6.3lbs. If the weight input is not within
0.3~6.3, the input will be invalid.
3. Press " Start/Enter/Add 30 Sec. " to start
defrosting and the cooking time remained will
be displayed.
Power Level
Clock Setting
Kitchen Timer
Microwave Cooking
Weight Defrost Function
Popcorn
Frozen
Entree
Fresh
Vegetable
Weight
Defrost
Cook
Time
Clock
O/Cancel
Hold 3Sec. To Lock
Start/Enter
Add 30 Sec.
Kitchen Timer
on/o
Power
Level
Time
Defrost
Favorite
Frozen
Vegetable
Potato
Dinner
Plate
Beverage
Pizza
Reheat
Soup
1. Press " Kitchen Timer on/off" once, the
screen will
display 00:00 .