9
CARE AND MAINTENANCE
1. ALWAYS unplug the unit before cleaning. Allow to cool if unit has been in use for a long period.
2. Wipe the outer surface with a soft, damp cloth and soap in needed. DO NOT use abrasives to clean the unit.
3. DO NOT immerse the vacuum sealer or the cord in water, or spray with any liquid.
4. To clean the inside of the unit, wipe away any food or liquid with a paper towel.
5. Dry all parts thoroughly before you plug in and operate the unit again.
6. Vacuum chamber may trap liquids that were drawn from the bag; it can be removed and cleaned with mild
dish soap and a warm, damp cloth. Dry thoroughly.
To Next Page
Loading...