12
TIME COOK
1. Touch the POWER pad.
program the desired power
level. (Please refer to the
wattage output chart in the
page 7.)
2. Touch the time set pad for the
cooking time.
3. Touch the Start pad.
“SELECT POWER LEVEL OR COOKING TIME
DEFAULT POWER LEVEL HIGH” is displayed.
“HIGH” blinks three times.
The selected time appears and “PRESS
START” is displayed. “START” blinks three
times.
The display is changed into cooking time and
counts down the remaining time. When the
cooking time ends, you will hear a beep.
NOTE: Your oven can be programmed for
59 minutes 99 seconds. (59:99)
If you try to set an incorrect time over
59 minutes 99 seconds, “RANGE
ERROR PRESS CLEAR” is
displayed with a beep sound.
NOTE: 1. Using lower power level increases the cooking time which is recommended for foods such
as cheese, milk and slow cooking of meats.
2. Repeat the above procedures twice for time cook in two stages.
3. If the power pad is touched during operation, the present power level will appear in the
display window.
To Next Page
Loading...
