10
CONTROLS
CLOCK
When the oven is first plugged in, the display will flash ":0" and a tone will sound. If the AC power
ever turns off, the display shows ":0" when the power comes back on.
1. Touch CLOCK/A.START pad.
2. Touch CLOCK/A.START pad
once more.
3. Enter the correct time of day by
touching the time set pads.
4. Touch CLOCK/A.START pad.
This is a 12 hour clock system and “12H” is
displayed.
This is a 24 hour clock system and “24H” is
displayed.
The selected time blinks.
The display stops blinking and the colon
starts blinking.
NOTE: This oven has multiple clock
system. If you want 24 hour
clock system, omit this step
(step 2).
CLOCK/
A.START
CLOCK/
A.START
NOTE: 1. If you selected 12 hour clock system, this digital clock allows you to set from 1:00 to 12:59.
If you selected 24 hour clock system, this digital clock allows you to set from 0:00 to 23:59.
2. If you attempt to enter an incorrect time, the time will not be set and an error signal tone will
sound. Touch CLOCK/A.START pad and re-enter the correct time.
To Next Page
Loading...
Need help?
General
