Changing The Reversible Doo
CAUTION: To avoid personal injury to yourself
and/or property, we recommend someone
assist you during the door reversal process.
1. Remove the top hinge assembly and keep them for
future use.
2. Remove the bottom hinge assembly and keep them
for later use.
3. Remove the plug buttons from the upper left holes
and transfer them to the uncovered holes at the
right side. Be sure to press the plug buttons
firmly into the holes.
4. Take out a new set of top hinge assembly attached
and install on the opposite side.
5. Re-install the bottom hinge assembly previously
removed in step 2 on the opposite side.
6. Make sure the door assembly is properly aligned on
the cabinet before tightening the screws.
7. Remove the door handle and re-install on the
opposite side.
8 . Remove the plug buttons from the right doorframe
and transfer them to the uncovered holes at the left
side. Be sure to press the plug buttons firmly into
the holes.
The process is now complete.
10
To Next Page
Loading...
Need help?
General
