Placing and Installation
to assure adequate ventilation. There should be
4in. between both size of the chiller and other
article.
electric shock by providing a path of least
resistance for electric current. This appliance
is equipped with a power cord having an
grounding conductor. The plug must be
plugged into an appropriate wall outlet
that is installed and wired in accordance
CHOOSING THE RIGHT PLACE
Place the appliance in a dry and regularly
ventilated room. Never place the appliance near
heat emitting devices (e.g. cooking appliances,
radiators, water heaters or similar devices) and
do not expose to direct sunlight.
The appliance should be positioned at least 2in.
away from electric or gas cooking appliances
and at least 12in. away from oil or coal fired
stoves. If this is not possible, use an appropriate
insulation barrier.
Place the appliance firmly on a solid base. Some
INSTALLATION
Connect the appliance power cord and plug
Behind the appliance there should be a free space
of at least 3in. . Kitchen units (cupboards) should
be at least 2in. away from the appliance in order
the appliance is properly grounded.
CONNECTION TO POWER
SUPPLY
to a properly grounded wall outlet. The required
nominal voltage and frequency are indicated
WARNING
Instructions to avoid to the risk of fire ,
electric shock , or injury to persons.
WIRING INSTRUCTIONS
For your personal safety, this appliance must
be grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of
on the rating plate (inside the unit or on the
exterior rear wall of the unit).
4
with all existing local codes and ordinances.
Consult a qualified electrician or serviceman
if the wiring instruction are not clearly
understood, or if doubt exists as to whether
appliances have adjustable feet on the front side;
use them to level the appliance.
To Next Page
Loading...
Need help?
General
