21
BIOS
POWER MANAGEMENT SETUP
Power Management Setup changes the system power savings function.
Run the Power Management Setup as follows:
1. Choose POWER MANAGEMENT SETUP from the Main Menu and a
screen with a list of options will appear.
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp/PgDn/+/- keys.
ACPI function : Disabled
Power Management : User Define
PM Control by APM : Yes
Video Off After : Suspend
Video Off Method : V/H SYNC+Blank
MODEM Use IRQ : 3
Soft-Off by PWRBTN : Instant-Off
HDD Power Down : Disabled
Doze Mode : Disabled
Suspend Mode : Disabled
** PM Events **
VGA : OFF
LPT & COM : LPT/COM
HDD & FDD : ON
DMA/Master : OFF
Modem Ring Resume : Disabled
Wake Up On LAN : Disabled
RTC Alarm Resume : Disabled
Primary INTR : ON
IRQ3 (COM 2) : Primary
IRQ4 (COM 1) : Primary
IRQ5 (LPT 2) : Primary
IRQ6 (Floppy Disk) : Primary
IRQ7 (LTP 1) : Primary
IRQ8 (RTC Alarm) : Disabled
IRQ9 (IRQ2 Redir) : Secondary
IRQ10 (Reserved) : Secondary
IRQ11 (Reserved) : Secondary
IRQ12 (PS/2 Mouse) : Primary
IRQ13 (Coprpcessor) : Primary
IRQ14 (Hard Disk) : Primary
IRQ15 (Reserved) : Disabled
ROM PCI/ISA BIOS (2A6LGSNE)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ESC : Quit
F1 : Help
F5 : Old Value
F7 : Load Setup Defaults
: Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color
To Next Page
Loading...