EasyManua.ls Logo

Magic Vac Maxima 2 - Safety and Initial Setup; Important Safety Information

Magic Vac Maxima 2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
READ THIS IMPORTANT INFORMATION
BEFORE USING THE MACHINE!
The manufacturer makes every effort to ensure that all of their products
are of the highest quality and safety, however, as with any electric
appliance, fundamental safety regulations must be observed in order to
avoid hazards to people, animal and/or things.
s 4HISAPPLIANCECANBEUSEDBYCHILDRENAGEDFROMYEARSANDABOVE
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by
children without supervision.
s#AREFULLYREADTHEINSTRUCTIONSBEFOREUSINGYOURMAGIC VAC
®
MAXIMA
2, and keep it handy for future reference.
s4HEAPPLIANCEISNOTDESIGNEDFORCONTINUOUSOPERATION$ONOTCARRY
out more than one complete cycle every 2 minutes. The operating cycle
is 50 seconds approx and after then there’s the break until 2 minutes.
In extreme ambient conditions, an intensive use of the appliance
may trigger the automatic thermal protection devices. In such a case
allow the appliance to cool down sufficiently to enable resetting of the
protection devices.
s$ONOTUSETHEDEVICENEARORONHOTSURFACES
s4HEAPPLIANCECOVERISNOTPROTECTEDAGAINSTLIQUIDPENETRATION
s$O NOT DRAW LIQUIDS INTO THE VACUUM CHAMBER 3HOULD THIS HAPPEN
immediately dry the vacuum chamber.
s$ONOTSUBMERGETHEAPPLIANCEINWATERANDDONOTUSEITIFTHECABLE
or plug is wet; if this should happen during use, immediately unplug it
wearing dry rubber gloves. Do not remove or touch the appliance that
is submerged in water before unplugging it. Do not use it after having
removed it from the water (send it immediately to an authorized repair
centre or our authorized dealer).
s$ONOTTOUCHTHESEALINGBARDURINGUSEORATTHEENDOFTHECYCLEIN
order to prevent possible burns.
s$ONOTUSEKNIVESOROTHERSHARPUTENSILSTOREMOVEANYRESIDUEFROMTHE
sealing bar; always wait for it to cool off before cleaning it with a sponge
dampened with gentle detergent.
27

Related product manuals