FITTING/REMOVING THE PARTS
NOTE: your appliance will only start if both the bowl AND the lid (or the citrus press
basket) are locked into place.
When not using your appliance, only turn the lid (or the citrus press basket) partway,
so that it is not locked into position.
Assembly: lower the bowl onto the motor
shaft, spout facing left and turn anti-
clockwise.
Unwind the length of power cord you
require and thread it through the slots on
the underside of the motor base to avoid
vibrations.
Removal: unlock the citrus press basket or
the lid by turning clockwise.
1
1
Turn the bowl anticlockwise until it locks
into place. Fit the required attachment
(p. 8-11).
Turn the bowl clockwise and lift up the
bowl.
2 3
2 3
Carefully wash all the parts before using your appliance for the first time (p. 14).
*
7
To Next Page
Loading...
Need help?
General
