54
• Rinsing :
➣
you must now briefly rinse out the
machine. This process enables you both to preheat your cup and
to eliminate any residual water in the circuits so that your coffee
is brewed with fresh water at the correct temperature.
NB : if the appliance has only been switched off for a brief
period, the indicator will stay on (not flashing), in which case
you do not need to carry out this rinsing process.
• Place an empty cup under the flow head.
• Press the button. Hot water will flow through the circuits and
out into the cup. The process will stop of its own accord.
➣
= machine ready.
• Place one or two cups under the flow head.
NB : the small holes in the grid make it easier to position them
correctly.
• Adjust the height of the flow head according to the size of your cups.
The pipes protruding from the flow head may be scalding hot.
A large or small espresso ? Setting the water volume adjuster
Your appliance boasts an automatic stop mechanism, which means that the flow of coffee
automatically comes to a halt once the preselected volume has been reached.
• Turn the water volume adjuster to select the quantity of coffee
you wish to brew :
- Position
➣
small, strong coffee.
- Position
➣
large coffee.
NB : when you select two cups, the amount of water is
automatically doubled.
A fine or coarse grind ?
The lighter the colour of the beans (lightly roasted), the finer the grind should be.
• Adjust the fineness of the grind according to the degree of
roasting.
- In a clockwise direction = coarser.
- In an anticlockwise direction = finer.
You must only adjust the grind when the grinder is actually
working.
NB : Experiment a few times to find the ideal setting.
R
E
A
D
Y
To Next Page
Loading...
Need help?
General
