To Next PageTo Next PageHow to fix Magnavox TV when there is no power?
If your Magnavox TV has no power, start by checking the power cord. Unplug it for 10 seconds, then plug it back into the AC outlet, and press the power button on the TV or remote. Also, verify the wall outlet has power and isn't controlled by a switch that's turned off. Check the fuse or circuit breaker. If you're using a power strip or surge suppressor, inspect it for a blown fuse.
What to do if Magnavox TV remote control is not working?
If your Magnavox TV remote isn't working, first check and replace the batteries with AA heavy-duty (zinc chloride) or alkaline batteries if needed. Ensure you're pointing the remote towards the front of the TV. Clean the remote sensor. If problems persist, unplug the TV for 10 seconds, plug it back in, and try the remote again. Inspect the remote for any damage or battery acid; if damaged, it might need replacement.
Why is there no sound on my Magnavox 20MS233S - 20" Color Stereo TV?
If your Magnavox TV has no sound, first check the volume by pressing the VOLUME + button on the TV or VOL + on the remote. If that doesn't work, press the MUTE button on the remote to restore the sound.
What to do if my Magnavox TV has no picture?
If your Magnavox TV isn't displaying a picture, first check the antenna or cable TV connection at the back of the TV to ensure it's securely connected to the 75? jack. Then, check the CABLE setting. Set CABLE to YES if you have cable TV, or NO if you're using an antenna. Finally, use Auto Program to add channels to the TV's memory.
How to fix Magnavox TV that will not display any channels above 13?
To fix the issue of a Magnavox TV not displaying channels above 13, first, try selecting the channel again. If you have cable TV, ensure that the CABLE setting is set to YES. Use the AUTO PROGRAM function to add all available channels to the TV's memory. Finally, save the channel(s) in the TV's memory using the CHANNEL EDIT function.
What to do if I cannot remember the Access Code for SMARTLOCK on my Magnavox TV?
If you cannot remember the Access Code for SMARTLOCK on your Magnavox TV, you can use the default code. Press 0, 7, 1, 1 to enter the SMARTLOCK feature and set a new personal access code.
General| Type | Color TV |
|---|---|
| Audio | Stereo |
| Display Type | CRT |
| Model Number | 20MS233S |
| Stereo | Yes |
| Screen Size | 20 inches |
Registering product within 10 days confirms right to maximum warranty protection.
Completed card serves as verification of ownership in case of theft or loss.
Steps to check power cord, outlet, and fuse for power issues.
Steps to check connections, CABLE setting, and use Auto Program.
Steps to check volume, MUTE button, and remote batteries.
Steps to check batteries, sensor, and power cycle the TV.
Details about who is covered under the warranty and proof of purchase requirements.
Explains what parts and labor are covered and for how long.
Lists items and conditions not covered by the warranty.
