Magnavox 50MV314X - User Manual

Questions and Answers

N
Nathan BrownAug 19, 2025
What to do if my Magnavox 50MV314X TV has no picture or sound?
- B
  Brandon Hansen MDAug 20, 2025
  If your Magnavox TV displays no picture or sound, try viewing other channels to rule out issues with the broadcasting station or weak signal strength. You can also unplug the AC power cord, wait about a minute, and then plug it back in and turn the unit on again. If you are setting up the unit for the first time or moving it to a new location, ensure that Autoprogram is completed. Also, check if the selected channel is restricted by Child and Ratings settings. Finally, make sure the unit has an input signal from a digital antenna (VHF/UHF) or a coaxial cable from your cable/satellite box connected to the appropriate input.
M
Melissa YoungAug 21, 2025
How to fix Magnavox 50MV314X remote control that does not work?
- A
  Anthony WeaverAug 22, 2025
  If your Magnavox TV remote control buttons or the remote itself isn't working, first, re-insert the batteries, ensuring the polarities (+/–) are correctly aligned. Interference from infrared-equipped devices nearby could also be the cause. Make sure nothing is blocking the unit's remote control sensor and that the remote is pointed directly at it. To test the remote, press and hold any key while pointing it towards a digital or cell phone camera; if you see a flashing infrared light through the camera, the remote is working.
S
Scott WoodsAug 23, 2025
What to do if Magnavox 50MV314X TV power is on but no screen image?
- W
  William ThomasAug 23, 2025
  If your Magnavox TV has power but no screen image, verify that the connections for the antenna, cable, or satellite set-top box are correctly connected. Also, check that all cables to the unit are connected to the correct output jack on your Blu-ray Disc/DVD recorder or other devices. If using a computer as an input, ensure it is not in Sleep Mode. Finally, confirm that the correct input mode is selected by pressing the SOURCE button.
G
Gregg HoltAug 26, 2025
How to troubleshoot a Magnavox 50MV314X with no power?
- J
  Joseph PalmerAug 26, 2025
  If your Magnavox TV isn't powering on, ensure the AC outlet is supplying the correct voltage by plugging another electrical appliance into the same outlet to confirm it's working. If a power failure has occurred, unplug the AC power cord for one minute to allow the unit to reset itself.
A
agomezAug 27, 2025
How to adjust screen size on Magnavox 50MV314X?
- J
  Justin ManningAug 27, 2025
  If the display image on your Magnavox TV does not cover the entire screen, and you're using it as a PC monitor, verify that the horizontal and vertical positions are correctly set in your PC settings. If watching TV or using Composite Video, Component Video, or HDMI with 480i input, press the PICTURE SIZE button repeatedly to switch to various screen modes.
M
Michael MackAug 29, 2025
How to reset forgotten PIN code Magnavox TV?
- V
  Vincent ThompsonAug 29, 2025
  If you've forgotten your PIN code on your Magnavox TV, enter '0711' to clear your password.
C
clongAug 31, 2025
How to fix Magnavox TV that cannot connect to the network?
- C
  Chloe TaylorAug 31, 2025
  To resolve network connection issues with your Magnavox TV, first, check if the Ethernet cable is properly connected and ensure your modem or broadband router is turned on. Also, verify your network settings and confirm that the broadband router and/or modem are correctly connected.
T
Thomas QuinnSep 2, 2025
Why does volume change when switching inputs on Magnavox 50MV314X TV?
- L
  Loretta MitchellSep 2, 2025
  If you switch to a different input on your Magnavox TV and the volume changes, this is because the unit memorizes the volume level from the last time you adjusted it. If the sound volume from another device is higher or lower, the loudness will change accordingly.
A
afullerSep 4, 2025
What causes distorted picture or unusual sound on Magnavox TV?
- J
  Jeremy RaySep 4, 2025
  If you see a distorted picture or hear an unusual sound on your Magnavox TV, it might be due to NTSC (Analog) TV signal interference from electrical appliances, automobiles, motorcycles, or fluorescent lights. Try moving the unit to another location to see if this resolves the issue.
J
James MillerSep 7, 2025
How to fix sound issues with HDMI-DVI on Magnavox 50MV314X TV?
- J
  Justin JosephSep 7, 2025
  If you are using HDMI-DVI connections with your Magnavox TV and experience no sound, distorted sound, or incorrect audio, ensure that the analog audio signals from the HDMI-DVI device are connected to the Analog Audio Input L/R jacks.