EasyManua.ls Logo

Magnavox MWC13D5 - User Manual

Magnavox MWC13D5
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SERVICE MANUAL
This service manual shows only the differences between the
model MWC13D5/MSD513F and the original model 6513DF.
All other information is described in the service manual of the
model 6513DF.
13 COLOR TV/DVD
MWC13D5/MSD513F
SUPPLEMENT
Question and Answer IconNeed help?

Do you have a question about the Magnavox MWC13D5 and is the answer not in the manual?

Magnavox MWC13D5 Specifications

General IconGeneral
Display TechnologyCRT
Screen Size13 inches
Aspect Ratio4:3
Built-in TunerYes
InputsRF, Composite

Summary

Important Safety Precautions

Laser Beam Safety Precautions

Guidelines for safe handling of laser beams emitted by the DVD player.

General Safety Precautions

Critical safety rules for servicing TV circuits and general electrical safety.

Safety Checks After Servicing

Essential tests to ensure safety compliance before returning the unit to the customer.

Product Specifications

TV Section Specifications

Technical parameters for the television receiver section of the unit.

DVD Section Specifications

Technical parameters for the DVD player section of the unit.

Servicing Guidelines

Standard Servicing Notes

General procedures, board indications, connector handling, and solder notes.

Semiconductor Handling Precautions

Procedures for safely handling semiconductors to prevent electrostatic discharge.

Cabinet Disassembly Instructions

Step-by-step guide for disassembling the TV/DVD unit.

Electrical Adjustments

Service Mode Setup and DC Voltage Adjustment

How to enter service mode and adjust the DC 105V (+B) voltage.

Picture Quality Adjustments

Adjusting Brightness, Contrast, Color, Tint, V-Tint, and Sharpness settings.

Color and Image Purity Adjustments

Adjusting C-Trap, White Balance, Sub-Brightness, and Purity for optimal color.

Screen Geometry Adjustments

Adjusting Vertical Size, Vertical Shift, and Horizontal Position for proper screen display.

Focus and Frequency Adjustments

Adjusting focus for image clarity and H fo for horizontal frequency.

Beam Cut-off and Convergence Adjustments

Adjusting beam cut-off and convergence for accurate color reproduction.

Initialization and Firmware

How to Initialize the TV;DVD

Procedure to restore factory default settings for the TV and DVD functions.

Firmware Renewal Mode Procedures

Steps to update or renew the device's firmware.

Technical Diagrams

Block Diagrams (TV & DVD Sections)

System, signal process, and audio block diagrams for TV and DVD sections.

Schematic Diagrams (TV & DVD Sections)

Detailed circuit diagrams for the TV and DVD sections.

CRT CBA Views and Waveforms

Views of the CRT assembly and signal waveform representations.

Wiring Diagram, IC Functions, and Lead Identifications

Circuit connections, IC pin details, and component lead identification.

System Control Timing Charts

Timing charts illustrating system control signals during operation.

Parts and Views

Exploded Views (Cabinet)

Illustrated breakdown of the unit's cabinet and major assemblies.

Packing Instructions

Guidelines for packing the product, likely for shipping.

Parts Lists (Mechanical & Electrical)

Comprehensive lists of mechanical and electrical components with part numbers.

Related product manuals