Magnavox 40ME313V/F7 User Manual

40” LCD TV
chassis FL13.12
© 2013 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto
is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way
without the express written consent of Funai. All other trademarks used herein remain the exclusive property of
their respective owners. Nothing contained in this manual should be construed as granting, by implication or
otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any
other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights
to the fullest extent of the law.
SERVICE MANUAL
Contents
40ME313V/F7 MAGNAVOX (Serial No.: DS1)
130805

Magnavox 40ME313V/F7 Specifications

General

Brand	Magnavox
Model	40ME313V/F7
Category	LCD TV
Language	English

Summary

IMPORTANT SAFETY NOTICE

Safety Precautions for LCD TV Circuit

Essential safety guidelines for servicing the LCD TV circuit, covering protective devices and openings.

Precautions during Servicing

Critical safety measures and practices to follow while performing repairs on the unit to prevent hazards.

SPECIFICATIONS

STANDARD NOTES FOR SERVICING

Flat Pack-IC Removal & Installation

Step-by-step instructions and precautions for safely removing and installing flat pack integrated circuits using specialized tools.

Instructions for Handling Semiconductors

Grounding Procedures for Safety

Procedures for grounding human bodies and workbenches to prevent electrostatic discharge damage to semiconductors.

CABINET DISASSEMBLY INSTRUCTIONS

Disassembly Flowchart and Steps

Safety Check after Servicing

Clearance Distance Checks

Verification of minimum clearance distances between terminals and metallic parts after component replacement.

Leakage Current Test Procedure

Method for testing leakage current to ensure electrical safety after servicing.

ELECTRICAL ADJUSTMENT INSTRUCTIONS

White Balance Adjustment Procedure

HOW TO INITIALIZE THE LCD TV

TROUBLESHOOTING

Power Supply Section Troubleshooting

Flowcharts and guidance for diagnosing and resolving issues within the TV's power supply unit.

Video Signal Section Troubleshooting

Flowcharts for diagnosing and fixing problems related to video signal input and display.

Audio Signal Section Troubleshooting

Flowcharts for diagnosing and resolving issues concerning the audio output and signal processing.

BLOCK DIAGRAMS

SCHEMATIC DIAGRAMS / CBA AND TEST POINTS

PARTS LIST [40ME313V/F7 (Serial No.: DS1)]

Mechanical Parts List

Electrical Parts

Capacitors List

Diodes List