To Next PageTo Next PageWhy can't some functions be performed on my Magnavox MDR161V DVD Recorder?
Depending on the disc, you may not be able to do some of the operations on your Magnavox DVD Recorder. Refer to the instruction manual supplied with the disc.
What to do if my Magnavox MDR161V power does not turn on?
If your Magnavox DVD Recorder isn't turning on, ensure the AC power cord is securely connected. Check your breaker in case of a power failure. Also, press [TIMER SET] to cancel the timer standby mode.
Why is there no picture on my Magnavox MDR161V?
If there's no picture from your Magnavox DVD Recorder, first, securely reconnect the connecting cords and check for any damage. Ensure the connection to your TV is correct. Then, switch the input selector on your TV (such as to “L1”) so that the signal from the unit appears on the TV screen.
Why is there no sound or distorted sound on my Magnavox DVD Recorder?
If you experience no sound or distorted sound from your Magnavox DVD Recorder, re-connect all connections securely and check if the connecting cord is damaged. Verify the connections to the amplifier input and ensure the input device setting on the amplifier is correct. Note that sound is not output in pause or slow-motion playback, or in fast forward or fast reverse mode. Also, the audio is muted while the setup menu or timer programming display is shown, or while the screen saver is active.
How to fix Magnavox DVD Recorder when it does not operate properly?
If your Magnavox DVD Recorder is operating abnormally, unplug the unit and then plug it in again. This can resolve issues caused by static electricity.
Why does the disc not start playback from the beginning on my Magnavox MDR161V?
If the disc doesn't start playback from the beginning on your Magnavox DVD Recorder, and resume playback was activated, press [C] twice. You may have inserted a disc whose title menu or DVD menu automatically appears on the TV screen when it is first inserted.
Why does my Magnavox MDR161V DVD Recorder disc not play?
If your Magnavox DVD Recorder disc isn't playing, ensure a disc is inserted and that it is not blank. Make sure the disc is inserted with the labeled side facing up and correctly re-inserted. If moisture has condensed inside the unit, remove the disc and leave the unit turned On for about 2 hours until the moisture evaporates.
Why can't discs recorded on my Magnavox DVD Recorder be played on other DVD players?
If you are using DVD-RW/-R with your Magnavox DVD Recorder, please ensure you finalize the disc after recording.
What to do if nothing was recorded on my Magnavox MDR161V even though I set the timer correctly?
Recording may fail on your Magnavox DVD Recorder if there was a power failure during recording. The unit’s internal clock may have stopped due to a power failure lasting more than 30 seconds; reset the clock. The program may contain copy protection signals, or the timer setting may have overlapped with another setting that had priority.
Why can't I call up the setup menu on my Magnavox DVD Recorder?
Setup menus cannot be accessed during DVD recording or DVD playback on your Magnavox DVD Recorder.
General| Type | DVD Recorder |
|---|---|
| Recording Format | DVD-R, DVD-RW, DVD+R, DVD+RW |
| Video Inputs | Composite, S-Video |
| Tuner Type | NTSC |
| Number of Discs | 1 |
| TV Tuner | Yes |
| Remote Control | Yes |
| Video Recording Format | MPEG-2 |
| Audio Recording Format | Dolby Digital |
| Disc Compatibility | DVD-R, DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW |
| Playback Formats | MP3 |
| Audio Inputs | RCA (Left/Right) |
| Video Outputs | Composite |
| Audio Outputs | RCA (Left/Right), Digital Audio (Coaxial) |
Essential guidelines for safe product usage.
Warnings and instructions regarding laser product safety.
Measures to prevent electrical shock and fire hazards.
Recommendations for proper product placement and handling.
Guidance on seeking repair and cleaning procedures for the unit.
Details on recording features like DVD-RW/R, VCR, and program recording.
Information on playback modes, search functions, and media compatibility.
Options for editing recorded content on discs.
Guidance on operating the unit with the remote control.
Step-by-step guide for HDMI connection to a TV.
Instructions for digital audio connections (Coaxial and HDMI).
How to perform a standard recording.
The process of finalizing a disc.
Starting playback automatically or by pressing play.
General guide to various disc editing functions.
Setting parental controls and passwords.
Enabling or disabling the progressive scan feature.
Setting HDMI audio output and RGB range.
Troubleshooting no power, no picture, or recording problems.
Resolving distorted sound or remote control problems.
Troubleshooting HDMI connection and disc playback issues.
Troubleshooting VHS tape playback and recording issues.
How to handle the "Repairing" message on screen.
Troubleshooting VCR picture noise and tape playback problems.
