To Next PageTo Next PageHow to fix a Magnavox DVD Player that won't turn on?
If your Magnavox DVD Player isn't turning on, make sure the AC power cord is securely connected. Also, check the remote control batteries and replace them if they are weak.
Why is my Magnavox DVD Player not recording?
If your Magnavox DVD Player is not recording, it could be due to several reasons. Recording is prohibited from 2 minutes before a timer recording starts. The unit cannot record programs with copy protection signals. The recording media may be full, so try deleting unnecessary titles or using new media. Also, the maximum number of titles or chapters may have been exceeded; delete titles or insert new media.
Why is timer recording not working on my Magnavox DVD Player?
If your Magnavox DVD Player isn't performing timer recording, it might be because the internal clock stopped due to a power failure lasting over 1 hour.
Why is there no picture or sound on my Magnavox DVD Player?
If there's no picture, sound, or menu on your Magnavox DVD Player screen, first check the cables for any damage. Then, ensure all connections are securely and correctly made. Finally, make sure the correct external input channel is selected on your TV.
How to troubleshoot sound or subtitle issues on Magnavox DVD Player?
If you're experiencing no sound or subtitles on your Magnavox DVD Player, ensure all connected devices are turned on and that the external input channel is set correctly. Also, check that all connections are securely made. If using HDMI, sound will not output if “HDMI Audio” is set to “OFF”.
Why doesn't my Magnavox DVD Player start playback from the beginning?
If playback on your Magnavox DVD Player doesn't start from the beginning, the resume function may be activated.
What to do if my Magnavox DVD Player won't play?
If your Magnavox DVD Player isn't playing back, make sure a playable disc is inserted correctly with the labeled side facing up. Clean the disc if it's dirty or flawed, and check all connections. Also, review the parental lock settings.
Why does the language menu keep appearing on my Magnavox DVD Player?
If the language menu appears every time you turn on your Magnavox DVD Player, it might not have been turned off correctly. Finish the language setting by selecting a language in the menu, press OK, and then press STANDBY/ON to turn the unit to standby mode.
Why does my Magnavox DVD Player turn on by itself?
If your Magnavox DVD Player turns on automatically, it is designed to turn on 2 seconds before a timer recording without any operation.
Why can't I set the clock or channels on my Magnavox DVD Player?
If the clock setting and channel setting cannot be performed on your Magnavox DVD Player, it is because a recording is in progress; these operations are disabled during recording.
Power| power supply voltage | 120 V |
|---|---|
| power supply frequency | 60 Hz |
Ports & Interfaces| front connections | Analog Audio Left/Right In, Composite Video (CVBS) In, DV In, S-Video In |
|---|---|
| rear connections | Analog audio Left/Right out, Component Video output, Composite video (CVBS) output, Digital coaxial out, HDMI output, S-Video out, Analog audio Left/Right in |
| additional rear connections | Composite video (CVBS) input, S-Video in, RF In, RF Out |
Weight and Dimensions| set dimensions | 420 x 59 x 290 mm |
|---|---|
| set weight | 3.4 kg |
| packaging dimensions | 520 x 147 x 413 mm |
| weight including packaging | 4.6 kg |
