Functional overview (cont’d)
Before you start
Setup menus
Press [SETUP] to display the Setup menu. Then using [K / L], select a menu and press [OK] to display
the menu. These menus provide entries to all main functions of the unit.
1. Required Settings:
To set up the required
settings.
2. Playback:
To set up the unit to play
discs as you prefer.
3. Display:
To set up the OSD screen
and the front display of the
unit as you prefer.
4. Recording:
To set up the unit to record
to discs as you prefer.
5. Clock:
To set up the clock of the
unit as you need.
6. Channel:
To adjust the channel setting
of the unit as you prefer.
7. Disc Edit / CD Playback
Mode:
“Disc Edit” is available
only when a disc which is
formatted with DVD+VR
mode is inserted into the
unit. When a DVD-Video disc
(commercially available),
a blank disc, and DVD-R
formatted with other than
DVD+VR is inserted into the
unit, you cannot select “Disc
Edit”.
“CD Playback Mode” is
available only when an Audio
CD disc, a Video CD or a
CD-R/RW disc with MP3 files
is inserted into the unit.
1. Edit Disc Name:
Allows you to rename the
disc formatted with DVD+VR.
2. Disc Protect :
Allows you to protect a disc
from accidental editing or
recording.
3. Erase Disc (DVD+RW/DVD-
RW only):
Allows you to erase all
contents in the disc and
format it.
4. Make Edits Compatible
(DVD+RW only):
Allows you to make edits
possible to play discs in
other units after editing titles.
Finalize (DVD+R/DVD-R/
DVD-RW only):
Allows you to finalize a disc
containing recorded titles.
5. Random Play:
Allows you to activate the
random playback feature.
6. Program Play (Audio CD/
Video CD only):
Allows you to activate the
programmed playback
feature.
7. PBC (Video CD only)
Allows you to select images
or information on the menu
screen by activating PBC
(Playback control) function.
To Next Page
Loading...
Need help?
General
