Selecting the TV stereo or SAP
Getting started
You can select a sound channel to
output from TV. “Stereo” has been
selected as the default.
1
Press [SETUP].
2
Using [K / L], select “Required
Settings”. Press [OK].
Required Settings menu will
appear.
3
Using [K / L], select “TV Audio
Select”. Press [OK].
Option window will appear.
4
Using [K / L], select “Stereo” or
“SAP”. Press [OK].
Stereo:
Outputs main-audio.
SAP (Secondary Audio Program):
Outputs sub-audio.
5
Press [SETUP] to exit.
1
2
3
4
5
Notes on TV channel audio
• When you record a TV program available in second audio or stereo,
you have to select either Stereo or SAP in “Required Settings”
beforehand. Refer to the following table to check an appropriate
setting.
• You can only play the disc in second audio if a TV program is
available in second audio and you set “ TV Audio Select ” to “ SAP ”.
To Next Page
Loading...
Need help?
General
