Magnescale LH70 Quick Reference Manual

1/6
LH70_LY70 Angle display Quick reference manual
Ver. 2 (2022.12)
CS&S
LH70/71/72, LY71/72
Angle display
Quick reference manual
1. First of all
This manual describes how to use the angle display function of the display unit (LH70 series and LY70 series).
Ribbon scale (Digiruler) or commercially available rotary encoder can be used as the encoder that can be used for
angle detection. Each setting method is different, but the scaling function is used to correct the angle and display it.
The displayable range is ± 360 degrees
If the selected display resolution is too small for the number of output pulses (angle data) from the encoder, the
displayed value will be scattered. For continuous and smooth angle display, it is necessary to consider the number of
output pulses from the encoder and the display resolution to be selected.
For encoders with origin, the origin function of the counter can be used.
Table of contents:
1. First of all
2. Angle display using Digiruler
2-1. Combination
2-2. Configurable arc radius
2-3. How to install
2-4. Setting operation
3. Angle display using rotary encoder
3-1. Combination
3-2. Setting operation
LH71A
SL130
PL20C
PL25/60
Rotary encoder
SL700
PL101
SET-P16
MJ100
PL82

Magnescale LH70 Specifications

General

Brand	Magnescale
Model	LH70
Category	Cash Counter
Language	English