Magnum MIG 208 Alu Synergy User Manual

1
MANUAL inverter
semi-automatic WELDING
Model:
MIG 208 Alu Synergy
Drawings devices in the manual may differ from the original colors.
Translation of the original instructions.
with
NOTE: Please use a welder after a very careful reading the manual.
1. In order to ensure safety should be determined by qualified personnel responsible for installation,
maintenance, periodic inspection and repair equipment.
2. In order to ensure safety before working with the machine carefully and with full understanding
refer to the following instructions.
3. After reading the following instructions and keep it in a place accessible to other users of the
device.

Magnum MIG 208 Alu Synergy Specifications

General

Brand	Magnum
Model	MIG 208 Alu Synergy
Category	Welding System
Language	English

Summary

Intended Use of the Welder

Technical Data Specifications

Precautions for Safe Operation

General Safety and Operational Guidelines

Details general safety thoughts, pre-work checks, during welding, prohibited actions, and post-work activities.

Health and Environmental Safety Warnings

Highlights dangers of electric shock, fumes, arc rays, sparks, power supply, cylinders, and hot materials.

Understanding Safety and Operational Symbols

Safety and Operational Symbols Explained

Explains common warning symbols for general danger, EU compliance, disposal, and PPE.

Welder Construction and Control Panel

Control Panel Overview and Components

Identifies and describes the main components of the welding machine's control panel and external connections.

Synergistic Programs and Settings

Guides selection of welding modes (SYN, MAN, MMA, TIG) and spot welding functions (2t/4t).

Advanced MIG-MAG Settings

Details advanced parameters like wire speed, inductance, burn back, and gas flow time adjustments.

Welding Machine Kit Contents

Using the Welding Machine

Connecting to the Power Network

Provides instructions for connecting the welder to the power supply, checking voltage, and grounding.

Wire Preparation and Insertion

Guides fitting the welding wire and inserting the wire electrode, including roller selection.

Protective Gas and Welding Parameters

Covers protective gas connection, MIG/MAG welding parameters, and practical recommendations.

Cleaning and Maintenance Procedures

Troubleshooting Interference and Errors

Storage and Transportation Guidelines

Product Utilization and Disposal

Declaration of Conformity

Warranty Information