Magnum MIG 160 Mini User Manual

1
MANUAL inverter
semi-automatic WELDING
Model:
MIG / MMA 160 Mini
Drawings devices in the manual may differ from the original colors.
Original instructions.
with
NOTE: Please use a welder after a very careful reading the manual.
1. In order to ensure safety should be determined by qualified personnel responsible for installation,
maintenance, periodic inspection and repair equipment.
2. In order to ensure safety before working with the machine carefully and with full understanding
refer to the following instructions.
3. After reading the following instructions and keep it in a place accessible to other users of the
device.

Magnum MIG 160 Mini Specifications

General

Input Voltage	230V
Output Current Range	30-160A
Duty Cycle	60% at 160A
Wire Diameter	0.6 - 0.8 mm
Wire Feed Speed	2 - 12 m/min
Protection Class	IP21S

Summary

MANUAL inverter semi-automatic WELDING

INTENDED USE

TECHNICAL DATA

PRECAUTIONS FOR USE

General Safety Thoughts

General safety guidelines for welding operations and personnel.

Basic Steps Before Work

Essential preparatory steps before commencing welding work.

During Welding Operations

Safety rules and procedures to follow while performing welding.

Prohibited Actions

Actions that are strictly forbidden during welding operations.

Basic Activities After Work

Recommended procedures to follow after completing welding work.

Specific Hazard Warnings

Detailed warnings about electrical shock, fumes, arc rays, and other hazards.

SYMBOLS

Instructional and Safety Symbols

Explanation of common instructional and safety symbols used in the manual.

CONSTRUCTION AND CONTROL PANEL

Control Panel Overview

Identification and function of the device's control panel elements.

KIT CONTENTS

USE

Connecting to the Network

Instructions for safely connecting the welding device to the electrical network.

Inserting MIG-MAG Conductors

Steps for correctly inserting conductors for MIG-MAG welding.

Inserting Wire Electrode

Procedure for loading and setting up the welding wire electrode.

Protective Gas Connection

Guide for connecting the protective gas cylinder and regulator.

MIG-MAG Operation

Details on controlling wire feed speed and welding current for MIG-MAG.

MIG-MAG Welding Recommendations

Best practices and techniques for MIG-MAG welding.

MMA Welding

Instructions for using the MMA welding function and electrode selection.

CLEANING AND MAINTENANCE

Maintenance Rules and Schedule

Guidelines for device maintenance, including daily and monthly tasks.

INTERFERENCE AT WORK WELDERS

STORAGE AND TRANSPORT

UTILIZATION

WARRANTY

STATEMENT OF COMPLIANCE