Magnum CARIMIG 202LCD User Manual

WE3107 v.110413
SAVE THIS MANUAL
You will need this manual for safety instructions, operating procedures, and warranty.
Put it and the original sales invoice in a safe, dry place for future reference.
CONSERVEZ CE GUIDE
Vous aurez besoin de ce guide pour les instructions de sécurité, les procédures d’utilisation et la garantie.
Conservez-le dans un endroit sûr et sec pour référence future.
QUESTIONS? 1-800-567-8979
Model :
Our Customer Service staff are ready to provide assistance.
If a part is damaged or missing, replacement parts can be
shipped from our facility.
For help with assembly, or for additional product
information, call our North American toll-free number:
1-800-567-8979
Notre personnel de service à la clientèle sera prêt à
fournir assistance. Si une pièce est endommagée ou
manquante, des remplacements seront expédiés de notre
usine.
Pour de l’aide avec l’assemblage, ou pour des
informations additionnelles sur le produit, appeller notre
numéro sans frais nord-américain : 1-800-567-8979
CARIMIG 202LCD
Multi-Process DC LCD Welder

Magnum CARIMIG 202LCD Specifications

General

Input Voltage	230V
Output Current Range	20-200A
Wire Diameter	0.6-1.0 mm
Spool Size	5 kg
Protection Class	IP21S
Efficiency	85%
Welding Method	MIG/MAG
Duty Cycle	60% @ 200A
Power Supply	Single Phase

Summary

General Safety Instructions

General Safety Information

Overall safety guidelines for welding environments, equipment condition, and proper usage.

Specific Areas of Danger, Caution or Warning

Details critical hazards like electrical shock, fumes, arc rays, fire, hot materials, sparks, EMF, and gas cylinders.

Proper Care, Maintenance and Repair

MIG Welder

Description

Specifications and Dimensions

Provides detailed technical specifications and physical dimensions of the CARIMIG 202 LCD welder.

Welder Installation Procedures

Outside Connection of the Machine

Power Requirements and Extension Cords

Details on necessary power supply, voltage, circuit breakers, and extension cord usage.

Workpiece Setup and Joint Preparation

Ground Clamp, Wire Tension, and Gas Setup

Proper ground clamp connection, wire tension adjustment, gas installation, and selection.

Wire Spool and Feeder Installation

MIG Welding Operation

MIG Controls and Torch Handling

Explains MIG welding controls, torch handling, and workpiece positioning for optimal results.

MIG Welding Techniques and Tuning

Details on tuning wire speed, welding techniques, travel speed, and specific angles.

MIG Welding Positions and Bead Types

MIG Welding Special Techniques

MMA Welding Operation

MMA Controls and Arc Striking

MMA Welding Techniques and Positions

Troubleshooting and Technical Information

Troubleshooting Chart

A comprehensive chart detailing common welding problems, their causes, and recommended solutions.

Spare Part List

Service, Maintenance, and Storage

Guidelines for regular maintenance, cleaning, safe transportation, and proper storage of the welding equipment.