Need help?Do you have a question about the Magnum MMG55FH and is the answer not in the manual?
General| Model | MMG55FH |
|---|---|
| Type | Modified Sine Wave Inverter |
| Output Power | 5500W |
| Input Voltage | 12 VDC |
| Output Voltage | 120 VAC |
| Frequency | 60 Hz |
| Waveform | Modified Sine Wave |
| Cooling | Fan Cooled |
| Protection Features | Overload Protection, Low Voltage Protection, Short Circuit Protection |
Key safety practices to follow during generator operation, including area cleanliness and safe practices.
Details hazards related to engine operation, including exhaust, fueling, hot surfaces, and moving parts.
Covers safety for electrical connections, wiring, and servicing, emphasizing qualified personnel.
Diagram showing the layout of controls and indicators on the main control panel.
Detailed descriptions of each numbered component on the main control panel.
Explains the MDC's role in monitoring and control, detailing its five main sections.
Describes the functions of the 'OPERATION' keypad buttons for starting and stopping.
Details the generator information displayed on the MDC's LCD screen.
Details the engine information displayed on the MDC's LCD screen.
Step-by-step guide on how to adjust the generator's output voltage using the adjustment screw.
A comprehensive checklist of items to verify before starting the generator.
Steps 1-3 for manually starting the generator, including control switch and display checks.
Details steps 4-8 of the manual start process, including prestart, cranking, and running screens.
Addresses 'SD Start fail' and how to repeat the starting sequence after starter cooldown.
Steps for safely shutting down the generator, including load removal and cool-down.
Lists and explains the codes used by the MDC to indicate generator operational status.
Explains the types of alarms (Sensor fail, Warning, Shut down) the MDC can display.
Provides a detailed table of possible alarms, their specifications, and descriptions.
Steps to diagnose and resolve automatic shut down due to low fuel level.
Steps to diagnose and resolve automatic shut down due to low oil pressure.
Steps to diagnose and resolve automatic shut down due to high coolant temperature.
Troubleshooting for generator shut downs related to overcrank or speed issues.
Instructions on how to activate and use the emergency stop switch.
Critical safety warnings regarding isolating the generator and proper wiring for standby power.
To Next Page
