Magnum XR7 User Manual

9557A
9558A
9559A
MAGNUM XR9MAGNUM XR7MAGNUM XR5
Operator’s Quick Guide
t
Warnings 2. . . . . . . . . . . . . . . . . . . . . . . . . . .
Required Tools and Accessories 2. . . . . . .
System Components 2. . . . . . . . . . . . . . . . .
Setup 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Priming 4. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Tip & Guard 6. . . . . . . . . . . . . . . .
Spraying Techniques 8. . . . . . . . . . . . . . . . .
Shutdown and Cleaning 10. . . . . . . . . . . . .
Preparing for Storage 18. . . . . . . . . . . . . . .
Basic Troubleshooting 19. . . . . . . . . . . . . .
XR Series Airless Sprayers
Contents
All written and visual data contained in this document reflect the latest
product information available at the time of publication. Graco reserves the
right to make changes at any time without notice.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
PRINTED IN USA 309203 Rev. C 07/2000
To find your Graco/MAGNUM authorized service center
D See the enclosed Graco/MAGNUM Authorized Service Centers list
D Visit our website at www.graco.com
D Call us at 1–888–541–9788
NEED HELP?
Call us at
1-888-541-9788
This guide is intended as a reference. To prevent injury
and equipment damage and to maximize sprayer
performance and service life, read the enclosed
Operating Instructions before you use this sprayer.
Important Notice

Magnum XR7 Specifications

General

Power Source	Electric
Max Pressure	3000 PSI
Hose Length	50 ft
Voltage	120 V
Type	Airless

Summary

Important Notice

Setup

Assembling and Setting Up Sprayer

Instructions for assembling a new sprayer or setting up a stored sprayer for use.

Shutdown and Cleaning

Replacing Water with Storage Fluid

Priming

Flushing and Loading with Paint

Installing Tip & Guard

Installing Tip and Guard Onto Gun

Shutdown and Cleaning: Power Flushing

Spraying Techniques

Basic Spraying Techniques

Guidance on holding the gun, triggering, and aiming for optimal spray patterns.

Shutdown and Cleaning: Power Flushing (cont.)

Shutdown and Cleaning: Power Flushing (cont. 2)

Spraying Techniques: Adjusting Pressure

Adjusting Pressure to Optimum Setting

Guidance on adjusting spray pressure for optimal atomization and tip wear.

Shutdown and Cleaning: InstaClean Filter

Priming: Flushing Factory or Storage Fluid

Flushing Factory or Storage Fluid with Water

Shutdown and Cleaning: Replacing Water with Storage Fluid

Replacing Water with Storage Fluid (cont.)

Basic Troubleshooting

Resolving Common Difficulties

Troubleshooting common sprayer problems like pump not cycling or gun not spraying.