Magos SR-1000 - User Manual

©2023, Magos Systems Ltd. All rights reserved.
Introduction
Scope
This document aims to provide a user manual for the setup and installation of the SR-Series
sensor by Magos Systems. The manual provides information on mechanical structure and
interface, installation procedure and guidelines, and interface to manage the system.
Please read the entire document prior to the installation and or use of the product.
About Magos Systems
Magos was established in 2008 to realize its co-founder’s vision of bringing advanced radar
technology to the security, perimeter protection, and detection market. We are experts in
low-cost & power consumption and high-performance radars that can be easily integrated
with existing VMS, PSIM, and other control software and automatic PTZ slew to cue for an
end-to-end cost-effective and easily maintained solution for the customer’s security
requirements.
SR-Series
User Manual

Summary

Introduction

Scope

Manual for setup and installation of SR-Series sensor, covering mechanical structure, interface, and guidelines.

System Overview

Physical Installation

Personnel Authorized for Installation

Installation is intended for trained technicians/system integrators; contact Magos for authorized personnel.

Installation Restrictions and Limitations

Product installation requires keeping antenna 2m from persons; restricted in marine environments.

General Installation Guidelines

Mechanical Installation

Sensor Mounting

Installation Height

Sensor Direction

Additional Physical Guidelines

Electrical Installation Guidelines

Power Supply Interface

Communication Interface

Network Behavior

Radar Manager

BIT (Built-in Test)

BIT Mechanism

BIT Description

Handling Failed BIT Reports

Magos SR-1000 Specifications

General

Brand	Magos
Model	SR-1000
Category	Security Sensors
Language	English