Magos SR-Series - User Manual

©2023, Magos Systems Ltd. All rights reserved.
Introduction
Scope
This document aims to provide a user manual for the setup and installation of the SR-Series
sensor by Magos Systems. The manual provides information on mechanical structure and
interface, installation procedure and guidelines, and interface to manage the system.
Please read the entire document prior to the installation and or use of the product.
About Magos Systems
Magos was established in 2008 to realize its co-founder’s vision of bringing advanced radar
technology to the security, perimeter protection, and detection market. We are experts in
low-cost & power consumption and high-performance radars that can be easily integrated
with existing VMS, PSIM, and other control software and automatic PTZ slew to cue for an
end-to-end cost-effective and easily maintained solution for the customer’s security
requirements.
SR-Series
User Manual

Summary

Introduction to SR-Series User Manual

Scope of SR-Series Manual

Manual's purpose for SR-Series sensor setup and installation, covering structure, interface, and management.

About Magos Systems

Company background established in 2008, specializing in advanced radar technology for security and perimeter protection.

System Overview of SR-Series Sensors

SR-Series System Specifications

Physical Installation of SR-Series Sensors

Personnel Authorized for Installation

Installation is intended for technicians/system integrators trained by Magos Ltd.

Installation Restrictions and Limitations

Product must be installed at least 2m from persons and is restricted from marine environments.

General Installation Guidelines

Rules and recommendations for proper SR-Series sensor installation for optimal system integration.

Mechanical Installation of SR-Series Sensors

Sensor Mounting

Details on mounting holes, using Magos brackets, and ensuring secure installation with washers.

Installation Height Recommendations

Sensor Direction and Coverage

Additional Physical Installation Guidelines

Electrical Installation Guidelines

Communication Interface

Network Behavior

Radar Manager Software Tool

Built-in Test (BIT) Feature

BIT Mechanism

Details on continuous and periodic built-in tests, and BIT status reporting.

BIT Description

Explanation of BIT tests including Jamming, Current, Voltage, and Temperature monitoring.

Handling Failed BIT Reports

Warnings and Disclaimers

General Warnings and Disclaimers

General warnings regarding installation location, human contact, power supply, and responsibilities.

FCC Compliance Statement

Product Warranty Information

Limitation of Liability

Magos SR-Series Specifications

General

Brand	Magos
Model	SR-Series
Category	Security Sensors
Language	English