Magos MSA1356A - User Manual

©2023, Magos Systems Ltd. All rights reserved.
Introduction
Scope
This document aims to provide a user manual for the setup and installation of the SR-Series
sensor by Magos Systems. The manual provides information on mechanical structure and
interface, installation procedure and guidelines, and interface to manage the system.
Please read the entire document prior to the installation and or use of the product.
About Magos Systems
Magos was established in 2008 to realize its co-founder’s vision of bringing advanced radar
technology to the security, perimeter protection, and detection market. We are experts in
low-cost & power consumption and high-performance radars that can be easily integrated
with existing VMS, PSIM, and other control software and automatic PTZ slew to cue for an
end-to-end cost-effective and easily maintained solution for the customer’s security
requirements.
SR-Series
User Manual

Summary

SR-Series Radar Specifications

Detailed SR-Series Model Specs

Table detailing specifications for SR-150, SR-250, SR-500, SR-1000, and SCEPTER models.

SR-Series Physical Installation Guide

Mechanical Mounting Details

Recommended Installation Height

Provides a table with recommended minimum installation heights based on detection range.

SR-Series Sensor Aiming and Coverage

Sensor Aiming: Azimuth and Elevation

Explains how to aim the sensor for azimuth and tilt angle to optimize coverage.

Recommended Tilt Angles

Presents Table 3 showing recommended tilt angles for various heights and ranges.

SR-Series Physical Installation Guidelines

SR-Series Electrical Installation

Electrical Connection and Grounding

Details sensor cable connection, use of Magos cables, and grounding requirements.

Power Supply Requirements

Specifies requirements for POE injectors/switches and safety precautions for power connection.

SR-Series Communication and Software

Ethernet Communication Interface

Radar Manager Software Tool

Radar Manager Interface Overview

Assigning Fixed IP with Radar Manager

Explains how to assign a fixed IP address to a sensor using the Radar Manager tool.

SR-Series Built-in Test (BIT)

Built-in Test (BIT) Mechanism

Describes the built-in test feature, including continuous and periodic tests, and BIT status reporting.

Built-in Test (BIT) Descriptions

Handling Failed BIT Reports

SR-Series Regulatory Compliance

FCC Compliance Details

Industry Canada Compliance

SR-Series Product Warranty

Magos MSA1356A Specifications

General

Brand	Magos
Model	MSA1356A
Category	Security Sensors
Language	English