Magtek DYNAMAG - Getcaptracks; Gettrackdecodestatus; Gettrack1 Decodestatus; Gettrack2 Decodestatus

3 - MTSCRA Functions
Dynamag, DynaMAX, eDynamo, mDynamo, tDynamo, DynaWave, and iDynamo 6| Secure Card Reader Authenticators | Programmer’s
Reference (Java and Java Applet)
Page 32
3.28 getCapTracks
This function retrieves track capability. See commands 0x00 and 0x01, and property 0x05 in
D99875475 MagneSafe V5 Communication Reference Manual for detail.
String getCapTracks();
Return Value: Hex String containing track capability.
3.29 getTrackDecodeStatus
This function retrieves track decode status.
String getTrackDecodeStatus();
Return Value:
Track Decode Status. Consists of three 2-byte hex values representing the decode status for tracks 1, 2,
and 3 (respectively from left to right). Values are:
00 = Track OK
01 = Track read Error
02 = Track is Blank
3.30 getTrack1DecodeStatus
This function retrieves track 1 decode status.
String getTrack1DecodeStatus();
Return Value: String containing track 1 decode status.
00 = Track OK
01 = Track read Error
02 = Track is Blank
3.31 getTrack2DecodeStatus
This function retrieves the track 2 decode status.
String getTrack2DecodeStatus();
Return Value: String containing track 2 decode status.
00 = Track OK
01 = Track read Error
02 = Track is Blank
3.32 getTrack3DecodeStatus
This function retrieves the track 3 decode status.
String getTrack3DecodeStatus();
Return Value: String containing track 3 decode status.
00 = Track OK
01 = Track read Error
02 = Track is Blank