C-45
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
Lubrication Systems
7. INSTALLATION
a) Install the oil pump in the crankcase then tighten
the bolt to the correct torque.
b) Use liquid gasket (loctite 584) and Adapter plate.
Install the crankcase oil pan, tightening the bolts
to the correct torque.
c) Fill the crankcase with the correct grade of
lubricating oil to the oil level mark on the dipstick.
8. LUBRICATING OIL FILTERS
1. REMOVAL
a) Unscrew the spin-on oil filter from filter head and
install new filter.
NOTE: Engine Oil and filter element must be changed
after every 200 hours of engine operation.
b) Service Schedule :
For new tractor and overhauled engine first service
- Oil filter replacement after 200 hrs.
It is highly detrimental to engine reliability,
if cartridge is reused by reflushing with cleaning
solvent. Dispose off immediately.
Engine Oil Filter
To Next Page
Loading...
Need help?
General
