Mahindra 35 Series User Manual

C-100
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
3. Inspection and repair
For inspection and repair of nozzles contact
MICO BOSCH / STANDADYNE Dealer / Service.
4. Installation
Reverse the removal procedure using New copper
washer and tighten to the specified torque. Be sure
that the fuel overflow banjo in the injector is towards
the front of the engine.
After the assembly of the injector nozzles into the
cylinder head is completed, nozzle protrusion of
1.7 to 2.3 mm is to be ensured. The cross sectional
view of the engine showing the nozzle tip protrusion
is show in fig.6.
Fuel System

Mahindra 35 Series Specifications

General

Cylinders	3
Transmission	8 Forward + 2 Reverse
Fuel Type	Diesel
Brake Type	Oil Immersed
Brakes	Oil Immersed
Steering	Power Steering
Drive Type	2WD
Engine Type	Diesel
Steering Type	Power
Fuel Tank Capacity	45 liters