E-29
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
Rear Axle
5. Assembly
1. Install big end ball bearing in Real Axle Carrier
(RAC) and lock with circlip (H).
2. Clean retainer surface area and fit new oil seal
in retainer Rear Axle (2 nos.).
3. Install oil seals with retainer in Rear Axle.
4. Install outer ball bearing with fixture for
positioning of bearing.
5. Apply liquid gasket on retainer.
To Next Page
Loading...
