Name: Mahindra 4035
Brand: Mahindra
Rating: 5 (1 reviews)

To Next Page

To Previous Page

B-6

35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08

ASSEMBLING OF FRONT AXLE TO THE ENGINE

ASSEMBLY

1. Follow the reverse sequence of removal,

to assemble the Front axle assembly to the Engine

assembly. Tighten the Mounting bolts.

2. Start Engine and rotate the steering wheel in both

directions for few times until the Air trapped in

the pipelines is expelled. Check for steering noise

and vibrations.

Splitting Between Front Axle & Engine

22. Remove the bolts connecting the Front Axle

& Semi chassis in pillow block.

23. Move the semi chassis away from the front axle.

15. Drive out rear coupling roll pin by suitable punch.

16. Remove the propeller shaft.

17. Support the Engine by placing a Jack below

Engine Oil sump.

18. Support the semi chassis by using the crane.

19. Remove the semi chassis bolts from the engine.

20. Move the assembly of Front Axle & Semi chassis

away from the engine.

21. Support the Front Axle with a suitable

crane / jack.

Other manuals for Mahindra 4035

Questions and Answers:

Need help?

Do you have a question about the Mahindra 4035 and is the answer not in the manual?

General