► PARKING BRAKE LEVER
Push the brake pedal down while
pulling the parking brake up to engage.
Press the parking brake pedal and push
the brake pedal to release.
► BRAKE PEDAL
The brake pedal is located on the LHS of the operator.
It is used for two functions.
- To stop the tractor
- To release cruise control
Perform tight turns only at a slow safe speeds.
Doing so at a high speed can cause rollovers and very serious injury or death.
Caution
Do not change from forward to backward or backward to forward suddenly in high
range.
Sudden change may result in damage to mechanism and place the operator at
risk of injury.
Important
34
To Next Page
Loading...
Need help?
General