PTO
REAR PTO
The tractor has one speed PTO(540rpm). Use the PTO lever to engage.
The PTO switch must be OFF before PTO is engaged.
1. Decrease engine speed to near idle.
2. Make sure that PTO switch is OFF.
3. Engage rear PTO using the PTO lever.
4. Turn on the PTO switch.
5. Increase engine speed to desired speed.
Both of the rear and mid PTO are provided for variable utility. They can be engaged simultaneously or
separately at same time.
The engine will not start if PTO switch is ON position.
The engine will shutoff if the operator leaves the seat with parking brake released and PTO engaged
To avoid damage of transmission and implement, do not engage PTO with the engine
running at high speed.
Caution
37
Mid
Mid + Rear
Rear
Engine RPM REAR PTO speed
2,600 560RPM
N
To Next Page
Loading...
