► FUEL GAUGE
To avoid excessive condensation in the fuel tank , refill it the end of each
day’s work and ensure during the day that it does not drop to a low enough level
where the fuel system will require bleeding to expel air in the system after
refilling the tank.
► ENGINE COOLING WATER
If the gauge indicates that the engine is running hot, stop the tractor and
check the coolant in the radiator.
► CHECK DURING DRIVING
Constantly monitor the warning lights on the dash and if any
come on, stop the tractor to determine the cause.
If the oil pressure light comes on, check the oil level first of all.
If the oil level is OK, ask a qualified dealer to check the
reason for the light coming on.
If the alternator warning light comes on, check all
connections and ensure that the fan belt is not broken.
If all connections and the fan belt are intact consult your
dealer to determine the cause of the problem.
When traveling on public or farm roads connect both brake pedals and allow for the
weight of any mounted implement to ensure that the unit is not unbalanced.
Also allow for the width when passing other road users.
Where fitted use the hazard lights provided.
Strictly follow the local traffic regulations.
Caution
When operating near others with an implement attached take particular care to
allow for the width of the implement and avoid accidents.
Caution
Also, check to ensure that the fins in the radiator core are not clogged or that the tractor has a
broken or stretched fan belt.
Allow the engine to cool down before the opening radiator as serious burns may
result due to hot steam & boiling water.
Danger
48
To Next Page
Loading...
Need help?
General