■ Working lamps (front and rear) :
The working lamps are located on the cab roof (two in the front and one in the rear) .They are switched
on by means of the switches on the roof console
■ Rearview mirrors.:
The cab is provided with rearview mirrors on both sides. They can be adjusted and folded, whenever
necessary, to avoid interference with external obstacles.
The mirrors have a telescopic arm to allow positioning for maximum convenience by the user.
Remember that mirrors must always be positioned in compliance with road traffic regulations when
driving on a public highway.
■ Cab ceiling:
The ceiling is padded with insulation material to block heat radiation into the cab and keep the temperature
down when working in very sunny areas.
The cab platform is covered with a “firm grip” mat in the most commonly used areas.
It is recommended to keep this mat clear of earth, mud, etc. so that the operator may get on and off the
tractor in full safely.
Working Lamp (Front)
Working Lamp (Rear)
Rearview mirrors.
71
To Next Page
Loading...
