7-10
© Copyright Mahindra and Mahindra Ltd.062016
The tripmeter displays the elapsed distance travelled since the last
trip reset. There are two tripmeter’s (A/B) which can be reset as
necessary.
A
Tripmeter
B Reset Button
• To select trip A, press and release reset button A for a second
• To shift from trip A to trip B, press and release the reset button
A again for a second
• To shift from trip B to odometer, press and release the reset
button A again for a second
• press and hold the reset button to reset the trip reading to zero
7.8.4 Engine Coolant Temperature Gauge
The temperature gauge indicates the instantaneous engine coolant
temperature. The coolant temperature varies with changes in
weather, load on engine and driving pattern. Temperature bar rising
from 'C' towards 'H' indicates that the engine coolant is heating up.
Do not continue driving the vehicle with a overheated engine.
This will lead to damage of engine components and engine
seizure.
7.8.5 Fuel Level Gauge
The fuel display bar gives the status of the fuel level in the fuel tank.
F indicates the tank is full (8 bars/LED’s), E indicates the tank in
empty. When the fuel level reaches the reserve/low fuel, the ‘E’
along with the low fuel warning lamp (B) starts flashing. The amount
of fuel required to fill the tank up may be less than the specified tank
capacity, as a small amount of reserve fuel always remains in the
tank.
FEATURES AND CONTROL
To Next Page
Loading...
Need help?
General
