12-14
© Copyright Mahindra and Mahindra Ltd.062016
12.5.10 Checking the Wiper Blades
Lift the wiper arm from its position. Expose the blade lip for
inspection. Clean the wiper blade lips with water applied with a soft
sponge. If the wiper blade is not wiping the glass satisfactorily or is
worn-out, cut, cracked or bulging get it replaced at an Authorized
Mahindra Dealer.
12.5.11 Changing the Wiper Blade
1. Lift the arm and position the wiper blade at right angles to
the wiper arm
2. Press the retaining clip in the opposite direction, disengage
the wiper blade and pull it off the arm
To prevent damage to the windshield, don’t let the wiper arm slap
down on to it.
3. Hold the end of the rubber and pull until the tabs are free of
the metal support
4. Carefully insert the new blade rubber. Then install the blade
assembly in the reverse order of removal
12.6 Headlamp Bulb Replacement
The head lamp bulb can be replaced without removing the head
lamp assembly from the vehicle.
To replace the head lamp bulb;
• Ensure ignition is switched OFF
MAINTENANCE
To Next Page
Loading...
Need help?
General
