12-16
© Copyright Mahindra and Mahindra Ltd.062016
Do not touch the new bulb with your fingers. Oil contamination
will severely shorten bulb life. If the bulb comes in contact with
any oily surface, clean the bulb with rubbing alcohol.
To avoid burning yourself, do not replace the light bulbs when
they are hot. Halogen bulbs have pressurized gas inside and
are to be handled with special care. Mishandling it may cause
the bulb to burst or shatter. Hold the bulb with its metal/plastic
holder/base and do not touch the glass part with bare hands.
Using bulbs with units of higher output capacity/wattage is
illegal and may damage your vehicle’s electrical system.
Replacement bulbs must meet the specification of originally
fitted bulbs.
12.7 Maintenance - Inside the Vehicle
12.7.1 Lights
Make sure the headlights, stop lights, tail lights, turn signal lights
and other lights are all working. Check headlight aim.
12.7.2 Warning Messages and Lamps
Check all warning lamps appearing in the instrument cluster and
DDAS. Refer to the relevant sections in this manual for further
details.
12.7.3 Seats
Check that all seat controls such as seat adjusters, seat back
recliner, etc. operate smoothly and that all latches lock securely in
any position. Check that the head restraints move up and down
smoothly and that the locks hold securely in any latched position.
12.7.4 Seat Belts
Check that the seat belt system such as buckles, retractors and
anchors operate properly and smoothly. Make sure the belt
webbing is not cut, frayed, worn or damaged.
12.7.5 Accelerator Pedal
Check the pedal for smooth operation, uneven pedal effort or
stickiness. Check the foot well and remove obstructions if any.
MAINTENANCE
To Next Page
Loading...
Need help?
General
