Page 3
SAFETY PRECAUTIONS
WARNING: Failure to follow these precautions can result in serious injury
or death.
• Read and understand the Operation Manual completely before operating this unit.
• Always wear proper eye and skin protection when operating and maintaining this equipment.
• Take precautions to keep clothing, hair, hands, hoses etc. away from all moving parts of the vehicle.
• Many Automatic Transmission systems can be extremely hot and operate at high pressures. Always
use extreme caution when connecting and disconnecting hoses and adapters.
• Always keep a fire extinguishing device nearby when working with flammable liquids.
• Choose a well-ventilated work area and avoid breathing any harmful fumes when performing a
transmission fluid exchange.
• Check engine oil level and coolant level. Refill if low. Do not perform the exchange if either is low.
• Flush solutions are combustible and are harmful or fatal if swallowed. If swallowed call doctor
immediately and do not induce vomiting. If Flush Solution gets in eyes flush with water immediately.
For contact with skin wash with soap and water. Apply skin lotion if necessary to sooth irritation.
• Immediately clean up any transmission fluid spills and use proper container for disposal.
• Comply with local, state, and federal regulations for fluid disposal.
• Material Safety Data Sheets
(MSDS)
must be obtained on all chemicals and placed in a shop file
for reference.
IMPORTANT
Check transmission fluid level according to manufacturer’s
instructions before connecting the ATX-3 Plus Boost
Adjust fluid level if required
To Next Page
