Need help?Do you have a question about the Mahlkonig EK OMNIA and is the answer not in the manual?
General| Grinding Method | Flat Burr |
|---|---|
| Burr Material | Steel |
| Grind Settings | Stepless |
| Burr Diameter | 98 mm |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Burr Size | 98 mm |
Guidance on how to read and keep the manual for future reference.
Explains the meaning of various symbols and signal words used in the manual.
Defines the specific purpose for which the grinder is designed.
Provides crucial warnings and precautions for safe operation of the grinder.
Manual control of grinding process and degree via rotary control and start/stop button.
Grinding based on pre-set recipes with defined dosage quantity and grinding degree.
Grinding based on recipes for selected bean types, allowing storage of up to 10 bean types.
Steps to verify the grinder is complete and undamaged upon arrival.
Instructions for placing, connecting the hopper, collecting tray, and power plug.
Details on how to connect the grinder for potential equalization.
Procedure for inserting and removing the bean hopper.
Instructions on how to load coffee beans into the hopper.
Steps to power on the grinder and initial setup requirements.
Guide on choosing modes, recipes, and bean types for grinding.
Instructions on how to place the coffee grounds receptacle or bag.
Step-by-step guide for manual grinding using the Classic mode.
Procedure for grinding coffee beans using pre-defined recipes in Time mode.
Method for grinding coffee beans using recipes stored for specific bean types in Library mode.
Instructions on how to temporarily stop the grinding process.
Procedure for safely swapping different types of coffee beans in the grinder.
How to adjust the fineness of the coffee grind using the rotary control and touchscreen.
Information on creating and saving new grinding recipes, referring to a software manual.
Steps to modify parameters of already saved grinding recipes.
Process for adding new bean types and performing calibration via the touchscreen.
Instructions for cleaning the area beneath the grinder.
Guide on how to clean the external body of the grinder.
Daily cleaning instructions for the bean hopper to maintain coffee taste.
Steps for cleaning the internal grinding mechanism, recommending specific cleaners.
Solutions for issues where the grinder is unresponsive or the screen is off.
Troubleshooting steps for when the grinder motor runs but grinding does not occur.
Addresses issues of inconsistent grinding or the process stopping unexpectedly.
Solutions for decreasing dosing accuracy and problems seating the bean hopper.
Guidance on recycling the grinder's packaging materials.
Instructions for the proper disposal of the electrical appliance.
To Next Page
