Mahlkonig E65 GbW User Manual

Troubleshooting: Mahlkonig E65 GbW
Problem Cause Remedy
The grinder is
not grinding;
the display
does not
light up.
• The power
plug is not
plugged into a
socket.
• The bean con-
tainer is not
inserted.
• The thermal
overcurrent
circuit-breaker
has been
triggered.
• The electric
fuse has
tripped.
 Insert the power plug into a properly
installed wall socket.
 Insert the bean container (see
Instruction Manual, “Se ng up the
grinder and inserting the bean
container” sec on).
 Check whether the circuit-breaker’s
release bu on has popped out. Push
it back in if necessary. If the circuit-
breaker repeatedly pops out, contact
a service technician for support.
 Check the electric fuse. Return it to
its original state or replace it. Check
whether other loads are connected
to this fuse and if so, pull their plugs.
If the fuse trips repeatedly, contact a
service technician for support.

Mahlkonig E65 GbW Specifications

General

Brand	Mahlkonig
Model	E65 GbW
Category	Coffee Grinder
Language	English

Summary

Troubleshooting Mahlkonig E65 GbW

Grinder Not Grinding, Display Not Lighting Up

Troubleshoot issues where the grinder is not grinding and the display is not lighting up.

Grinder Humming But Not Grinding

Address problems with the grinder humming but not producing ground coffee.

Grinder Not Grinding, Display Permanently Red

Resolve issues where the grinder is not grinding and the display remains red.

Grinder Not Grinding Fine Enough

Troubleshoot scenarios where the grinder fails to grind coffee to the desired fineness.

Grinder Stops Intermittently

Diagnose and fix problems where the grinder stops grinding continuously or intermittently.

Incorrect or Imprecise Weighing

Address issues with the grinder not weighing correctly or weighing imprecisely.

Grounds Not Deposited Centrally

Fix problems where grounds are not deposited into the center of the inserted portafilter.

Decreasing Dispensing Accuracy

Troubleshoot declining accuracy in the grinder's dispensing function.

Bean Hopper Cannot Be Attached

Resolve issues preventing the bean hopper from being properly attached to the grinder.

Grinder Lid Cannot Be Attached

Fix problems where the grinder lid cannot be attached correctly.

Maintenance and Service