STEP 1: LEVEL DISHWASHER STEP 2: HOT WATER CONNECTION
• Place dishwasher in its permanent location
and use the leveling feet to ensure the unit is
level and stable.
• The optimal water temperature is 140°F. For
best results, the water temperature should be
no lower than 125°F.
• Install the included 5' flexible water hose, filter,
and gasket as shown in Fig. 1.
QUICK START GUIDE
All plumbing and electrical connections must be made by a qualified installer in accordance
with your state and local codes.
To Wall:
Straight side with
filter 3/4" fitting
To Dishwasher:
90° side plus gasket
D
ITEM NUMBERS: 541HTDT401, 541HTDT403
FIG. 1
For hard water supplies with a hardness of
over 3 gpg or 5°fH and pH beyond the range of
6.5–7.5, a water conditioner/descaler must
be installed.
02/2024
To Next Page
Need help?
General
