Major tech MT22 - Resistance (Auto Ranging); Temperature; Diode Test; Operation

9
6. OPERATION
WARNING: Risk of electrocution. High-voltage circuits, both AC and
DC, are very dangerous and should be measured with great care.
1. ALWAYS turn the function switch to the OFF position when the meter
is not in use. This meter has Auto OFF that automatically shuts the
meter OFF if 15 minutes elapse between uses.
2. If “OL” appears in the display during a measurement, the value
exceeds the range you have selected.
Range Resolution Accuracy
200.0Ω 0.1Ω ±1.2% of rdg ±4 dgts
2.000kΩ 1Ω ±1.0% of rdg ±2 dgts
20.00kΩ 10Ω
200.0kΩ 100Ω ±1.2% of rdg ±2 dgts
2.000MΩ 1kΩ
20.00MΩ 10kΩ ±2.0% of rdg ±3 dgts
5.7. Resistance (Auto-ranging)
Input Protection: 500V DC or 500V AC RMS.
Range Resolution Accuracy
-50°C~+1000°C 1°C ±3% of rdg ±5dgts
-58°F~±1832°F 1°F ±3% of rdg ±8dgts
5.8. Temperature
Sensor: Type K Thermocouple
Overload protection: 500V DC or AC RMS.
Range Resolution Accuracy
0.3mA typical 1 mV ±10% of rdg ±5 dgts
5.9. Diode Test
Open circuit voltage: 1.5V DC typical
Overload protection: 500V DC or AC RMS.
5.10. Audible continuity
Audible threshold: Less than100Ω; Test current: <0.3mA
Overload protection: 500V DC or AC RMS.