Need help?Do you have a question about the Major M-360 and is the answer not in the manual?
General| Brand | Major |
|---|---|
| Model | M-360 |
| Category | Transceiver |
| Language | English |
Details on receiver sensitivity, selectivity, spurious rejection, and squelch settings.
Details on transmitter power output, modulation capability, frequency stability, and SSB generation.
Wiring diagram and pinout for the microphone connection.
Guidance on checking the vehicle's ground system for proper radio installation.
Advice on selecting an optimal and safe mounting location for the radio.
Step-by-step instructions for physically mounting the radio bracket and unit.
Specific wiring instructions for vehicles with a negative ground system.
Discussion on antenna mounting location and its effect on performance.
Steps and controls for receiving signals, including squelch and clarifier adjustment.
Procedures for transmitting, including microphone usage and avoiding distortion.
Meter displaying signal strength and RF output power.
Switch for adjusting RF gain to manage signal strength.
Switches used to select different frequency bands and channels.
Indicator showing the currently selected CB channel.
Light that illuminates when the CB unit is transmitting.
Adjusts transmitter/receiver frequencies for clear sideband communication.
Selects operating modes like AM, FM, LSB, and USB.
Silences receiver noise at a set threshold, improving reception clarity.
Enables Public Address mode for external speaker output.
Adjusts the audio output level or PA output volume.
Rotary switch to select any of the forty available channels.
To Next Page
